Saxwerk has received an order to supply a complete receiving silo with a discharge system, including a control cabinet and control panel, to Rosenholm’s wastewater treatment plant in Katrineholm. Delivery and installation will take place during the winter of 2026. Commissioning is scheduled for early 2027. The silo is equipped with Saxwerk’s original sliding discharge [...]
Saxwerk has received an order for the delivery of a complete silo with screw conveyors including control cabinet and control box, to Flens ARV. Delivery, installation and commissioning will take place during the winter of 2026. The silo is equipped with Saxwerk's original sliding frame discharge system. The material to be stored and discharged is [...]
Saxwerk has received an order to deliver complete silo with Saxwerk's original sliding frame, screw conveyor system and movable bellows system. The delivery is to the Enköping wastewater treatment plant. Delivery and installation will take place in 2025. Commissioning will take place in the summer of 2026. Material to be stored and discharged: Dry sludge [...]
Saxwerk has signed an agreement with Fiskarhedens Trävaror to build a 20MW hot water boiler for heating their timber kilns. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
Saxwerk has signed an agreement with Statkraft to build a 10MW hot water boiler in Åmål, Sweden. The plant's electric filter and condenser will also take flue gases from the existing 4MW boiler. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95. [...]
Saxwerk has received an order for the delivery of two complete silos with Saxwerk's original sliding frame discharge and discharge screw. The delivery is to Fredrikstad reningsverk, Sweden. Delivery and assembly takes place 2024-2025. Commissioning takes place the summer of 2025. The material to be stored and discharged is dry sludge from the treatment plant. [...]
Saxwerk has received an order for the delivery of a complete silos with Saxwerk's original sliding frame discharge and discharge screw. The delivery is to Mongstad EP in Norway. Delivery in summer 2025. Assembly and commissioning will take place at the end of 2025. The material to be stored and discharged is sludge from water [...]
Saxwerk has received an order for the delivery of a complete silo with Saxwerk's original sliding frame discharge and discharge screw. The delivery is to Hofors reningsverk, Sweden. Complete delivery with electrical control, sludge pipe assembly. Commissioning takes place in the fall of 2024. The material to be stored and discharged is dry sludge from [...]
Saxwerk has received an order for the delivery of two complete silos with Saxwerk's original sliding frame discharge and a discharge screw. The delivery is to Sälen s reningsverk, Sweden. Delivery and assembly takes place (2024-2025). Commissioning in the summer of 2025. The material to be stored and discharged is dry sludge from the treatment [...]
Saxwerk has received an order from Stenungsunds kommun (Sweden) Strävlidens treatment plant to deliver a complete silo with discharge system including control cabinet and control box. Delivery, assembly and commissioning will take place in spring 2024. The silon is equipped with Saxwerk original sliding frame. The material to store and discharge is dewatered sludge from [...]
Saxwerk has signed an order with Rundvirke to supply a 6MW Hot Water Boiler Plant for their saw mill in Marmaverken. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 91.
Saxwerk has received an order for delivery of three complete silos (237 m3) with Saxwerk’s original sliding frame and discharge screw. Delivery is to VEAS, Slemmestad avloppsreningsverk. Delivery, assembly and commissioning will take place during 2023-24. The material to be stored and discharged is dewatered sludge from water treatment plant. Bulk material: Mechanically dewatered sewage [...]
Discharge System for sewage sludge loading station Saxwerk receives the order to supply and install two discharge systems for a sewage sludge loading station at a sewage treatment plant in southern Germany. The sewage sludge loading station is used for the intermediate storage and truck loading of mechanically dewatered sewage sludge at a municipal sewage [...]
Delivery of a sewage sludge silo at the sewage treatment plant Gütersloh-Putzhagen the City of Gütersloh (Germany) has commissioned Saxwerk to construct and deliver a complete sewage sludge silo for the intermediate storage and loading of stabilised and dewatered sewage sludge. The new silo will replace the existing conveyor system with discharge into several open [...]
Saxwerk has received an order for the delivery of Södra Wood Värö's new fuel handling system (Shavings), consisting of a fuel storage 3872 m3 with an outfeed capacity of 250 m3/h. Delivery includes bunker with discharge equipment as well as all conveyors, supports, platforms and stairs. The new fuel handling system connects to existing fuel [...]
Saxwerk will supply a 6MW hot water boiler to Solör for their new plant in Edsbyn, Sweden. Main delivery this spring, with heat delivery from autumn 2023. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 91.
Saxwerk is supplying 8 sliding frame discharge systems for steel and concrete silos for a new chipboard plant in Spain. The round silos have a diameter of 6500 mm and a filling height of 15,000 mm. Saxwerk sliding frames with discharge screws are used for the metered discharge of the bulk materials. [...]
Saxwerk has received an order for delivery of two complete silos (200 m3) with Saxwerk’s original sliding frame, discharge screw and splash protection type Moving Bellow System. Delivery is to Nodra, Slottshagens avloppsreningsverk. Delivery, assembly and commissioning will take place during 2022. The material to be stored and discharged is dewatered sludge from water treatment [...]
For the construction of a new particleboard plant in India, Saxwerk is supplying the discharge systems for all round silos and rectangular bunkers. The six round silos are designed with a diameter of 5.00 m - 6.00 m and up to 12 m filling height. Saxwerk sliding frames and hydraulic rotors with discharge screws [...]
Saxwerk receives the order for the delivery of 5 silo discharge systems. The Saxwerk scope of supply consists of round silos with hydraulically operated sliding frames and discharge screws. The round silos are designed with a diameter of 5.5 m and up to 12.5 m filling height. Rundsilos: Bulk material: Sawdust, core layer , [...]
Saxwerk has received an order for delivery of six complete silos (274 m3) with Saxwerk’s original sliding frame and discharge screw. Delivery is to Stockholm, Henriksdals avloppsreningsverk. Delivery, assembly and commissioning will take place during 2022. The material to be stored and discharged is dewatered sludge from water treatment plant. If you have questions [...]
Saxwerk receives the order to supply the discharge systems for the new construction of a wood fibre board plant in Lithuania. The Saxwerk scope of supply consists of round silos and rectangular bunkers as well as a wetash conveyor. The round silos will be designed with a diameter of 6.00 m - 7.00 m [...]
Saxwerk supplies a silo for insulation board fibres, with hydraulic rotor discharge system and 3 double screws for a wood fibre board plant in Germany. Silo Material : dry insulation fibres Discharge capacity : 680 m³/h Diameter : 7000 mm Silo height : 10500 mm Delivery will be in 2022 If you have questions [...]
Saxwerk has received an order for delivery of a receiving bin for external sludge to be dried in a dryer and after that incinerated in the existing energy plant. The system consists of 1 receiving bin with Saxwerk’s original push floor and discharge screw. The delivery is to Swedish Exergy AB. Delivery, assembly and commissioning [...]
Saxwerk delivers a silo for wood chips, with sliding frame discharge system and 4 discharge screws to Poland. Silo Material : dry wood chips Discharge capacity : 520 m³/h Diameter : 5000 mm Delivery will be in July 2021 If you have questions about this article, please contact Saxwerk Germany , phone: +495194 41 [...]
Saxwerk received an order to supply the complete discharge systems for a new particleboard plant in Russia. The plant will produce up to 500,000m³ of particleboard per year. The Saxwerk scope of supply consists of eight round silos and two rectangular bunkers. The round silos are designed with a diameter of 5.500 - 6.000mm [...]
Saxwerk supplies and assembles a sludge reception bunker for dewatered sludge. The delivery consists of a concrete bunker with hydraulically operated flap with push floor discharger and a discharge screw conveyor. Delivery, installation and commissioning will take place in April 2021. The sludge is dewatered sludge (DS= 15-35%) from various sewage treatment plants. [...]
Saxwerk has received an order for delivery and installation of a complete handling system for external sludge to be incinerated in the existing energy plant. The system consists of 1 receiving bin with Saxwerk's original push floor and discharge screw. 1 storage silo with Saxwerk's original sliding frame with a pre-press screw that pushes sludge [...]
Saxwerk supplies discharge systems for a rice straw fiberboard (MDF) production plant in Egypt. The four circular silos for sander dust, sawdust, fibers and chopped straw will be delivered with hydraulic rotor and discharge screws. Bulk material: sander dust, sawdust, fibers, straw Discharge capacity: 10- 60 m³/h Silo diameter: 6.000 mm volume: 200 m³ Delivery [...]
Saxwerk has received an order for the delivery of 1 complete silo with Saxwerk's original sliding frame discharge and 1 discharge screws. Delivery is to Kapellskär, Kapellskär harbor (ARV). Delivery, assembly and commissioning will take place at the end of 2020. The material to be stored and dispensed is dewatered sludge from treatment plants. [...]
Saxwerk supplies 3 round silo discharge systems for a new OSB plant in Russia. Silo volume: 150 m³ Bulk material: wood chips, dust and granulate discharge capacity: 10 - 280 m³/h Discharge system: hydraulic rotor with discharge screws Delivery will take place in 2021
Saxwerk supplies discharge system consisting of a hydraulically driven sliding frame and 2 discharge screws to France. Silo volume: 96 m³ Bulk material : dewatered sewage sludge from municipal sewage treatment plants, 30 % DS Bulk density : 1000 - 1300 kg/m³ discharge capacity: 70 m³/h Delivery will take place in September 2020
Saxwerk has been ordered to deliver a storage silo with discharge system to Silva Green Fuels new plant. The Silo has a volume of 94 m3. Discharge is done with a sliding frame and discharge screw. The delivery will take place in autumn of 2020. The material to store and discharge is wood chips and [...]
Saxwerk in consortium with VEÅ will build an 8 MW boiler plant for Arla in Visby, Sweden. The boiler plant consists of a 1000 m3 fuel bunker and a biofuel combustion unit and a 40 bar steam boiler. The boiler plant will also have two combi boilers in spare. The contract is with Brogas that [...]
Saxwerk is supplying 8 round silo discharge systems (sliding frame and hydraulic rotor) for a new particleboard plant in Japan. The plant is mainly operated with recycled wood. Round Silos Bulk material: recycling woodchips, fresh wood chips, wet flakes, dry flakes, surface layer flakes, core layer, dust Discharge capacity: 42 - 540 m³/h Volume: 150 [...]
Saxwerk has signed an agreement to supply a receiving silo with discharge system type sliding frame to Frya RA. Delivery and commissioning will take place during the summer of 2020. The material to store and discharge is dewatered sludge. If you have questions about this article, please contact Magnus Landberg, phone: +46 8-500 666 [...]
Saxwerk has signed contract and will delivery one sludge silo (250 m3) with Saxwerk’s original sliding frame with two discharge screws. Delivery is to Malmö, Sjölunda avloppsreningsverk in Sweden. Delivery, erection and start up will be in first half of 2020. Material to storage and discharge is sludge from seawage threatment. If you have [...]
Saxwerk delivers 3 wet ash conveyors for 3 combustion plants. Deliveries will be made in January, March and May 2020.
Saxwerk supplies discharge systems for 3 rectangular bunkers. Each bunker has a discharge capacity of 200 m³/h of wet wood chips. The total storage volume is approx. 1800 m³. Bulk material : Rubber tree wood chips Discharge capacity : 200 m³/h Volume : 1800 m³
Saxwerk supplies two hydraulic rotor discharge systems with discharge screws for a new OSB wood panel plant in the Middle East. Silo Material : Palm trees wood chips Discharge capacity : 150 m³/h Diameter : 5000 mm Silo Material : Dust Discharge capacity : 10 m³/h Diameter : 5000 mm [...]
Saxwerk will build a 16 MW hot water boiler for Martinsons Trä AB in Bygdsiljum outside Skellefteå, Sweden. The plant will be built during spring and summer. Planned start of operation is November 2020. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
Saxwerk has been ordered to deliver two receiving bins with discharge system to Laxå Pellets. Discharge is done with a push floor systems and leveling screws. The delivery will take place in the autumn of 2019. The delivery includes complete design and manufacturing. The material to discharge is shavings and dry wood chips. If [...]
Halmstads Energi has ordered an ash conditioner after their electric filter for boiler 4. The delivery consists of a screw pocket which feeds the ash to an ash conditioner. The humidified ash is placed in an open concrete bunker. To obtain a good filling, a leveling scraper is placed over the pocket. Delivery is complete [...]
Saxwerk has received an order from Lyselkil (Sweden) treatment plant to deliver a complete silo with discharge system including control cabinet and control box. Delivery, assembly and commissioning will take place in winter 2019. The silon is equipped with Saxwerk original sliding frame. The material to store and discharge is dewatered sludge from treatment plant. [...]
Saxwerk has been ordered to deliver two filter bottoms with discharge system to Solör Bioenergi Jessheims new hot water central. Discharge is done with a sliding frame and a discharge screw to a distribution screw. The delivery will take place in the autumn of 2019. The delivery includes complete design and manufacturing. The material to [...]
Saxwerk supplies the discharge systems for nine round silos and four rectangular bunkers. The pullfloor ladders arranged in the bunker convey each 250 m³/h of wet wood chips into the discharge screws. The total storage volume is approx. 3000 m³.Sliding frames or hydraulic rotors are used for the round silos, with a discharge capacity of [...]
Saxwerk has received an order from Töreboda treatment plant to deliver a complete silo with discharge system including control cabinet and control box. Delivery, assembly and commissioning will take place in summer 2019. The silon is equipped with Saxwerk original sliding frame. The material to store and discharge is dewatered sludge from treatment plant. [...]
Saxwerk has received an order for delivery of two complete sludge silos with discharge system and splash protection type Moving Bellow System. The delivery is to Helsingborg, Öresundsverket, Sweden. Delivery, assembly and commissioning will take place in early 2019. Material: Store and discharge of dewatered sludge from wastewater treatment plants. If you have questions [...]
Location: Hannover, 27-31 May 2019. World Exhibition Wood Industry. We are in hall 26 and stand G76 Welcome to visit us. Read more about LIGNA
Saxwerk has been ordered to deliver three filter bottoms with discharge system to Kähr’s new pellet plant. Discharge is done with a sliding frame and discharge screw. The delivery will take place in the autumn of 2018 to AB Gustaf Kähr / Nybro (Sweden).The delivery includes complete manufacturing and assembly. The material to discharge is dust. [...]
Now the 60 ton heavy hot water boiler has been lifted into place in Mora, using a 500T crane as well as a 200T auxiliary crane. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
Siempelkamp placed an order to supply 3 pieces pushfloor bunker, each with a volume of 800m³, for storage and discharging of wood chips. As well as 4 pieces discharge systems for round silos consisting of hydraulic rotor and sliding frame with discharge screws. The discharge systems are for a new OSB boards plant in [...]
Saxwerk supplies to Dieffenbacher a complete silo for wood chips, with sliding frame and 4 discharge screws. As well as a screwbottom for storage. Silo Material: Recycling of waste wood chips Discharge capacity: 346 m³/h Diameter: 6000 mm Screw bottom Material: Recycling of waste wood chips (categories A1 and A2) Discharge capacity: 420 m3/h [...]
Saxwerk received an order to supply 2 pieces pushfloor for storage and dosing of biowaste. The bunkers are each equipped with 4 distribution screws to ensure optimum filling. Installation site: Aprilia, Italy Material: Biowaste Storage capacity: Each 300 m³ Discharge capacity: 10 t/h If you have questions about this article, please contact Saxwerk Germany [...]
Saxwerk has signed an agreement with Siljan Timber about a new biofuel-powered energy plant for their killns, as well as energy for the district heating network in Mora. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
Download pdf (245 kb) Saxwerk has been ordered to deliver a new ash transportation system entirely in stainless steel to the CHP plant in Katrineholm. The delivery will take place in the summer of 2018. The delivery includes complete dismantling, manufacturing and assembly. The material is ash and slag. If you have questions about [...]
Saxwerk has been ordered to deliver a raw material silo with discharge system to Kähr's new pellet plant. The Silo has a volume of 650 m3. Output is done with a sliding frame and discharge screw. The delivery will take place in the summer of 2018 to AB Gustaf Kähr / Nybro (Sweden). The delivery includes [...]
Norrskog in Hissmofors has ordered a new fuel feeder for their furnace. If you have questions about this article, please contact Olof Eriksson, phone: +46 8-500 666 91.
Dieffenbacher ordered a pushfloor system with vibration screen for crushed bark - production waste wood and a Saxwerk wet ash conveyor Type TKF N for their Energy Plant. If you have questions about this article, please contact Christoph Groffmann, phone: +49 1715292122.
Saxwerk has been ordered to supply fuel bin and associated conveyor line to Cortus's new plant in Höganäs, Sweden. The delivery is scheduled for March 2018. If you have questions about this article, please contact Magnus Landberg, phone: +46 8-500 666 93.
November 2nd, the 70 ton heavy hot water boiler is lifted in place at Gällö, Sweden. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
Saxwerk will deliver the engineering for two Silos to Dieffenbacher. As discharge system Dieffenbacher choose Saxwerk Slidingframe with Saxwerk discharge Screws. Material: Saw Dust / Sander Dust Discharge rate: 30 m³ Volume: 300 m³ The delivery will be in June 2018. If you have questions about this article, please contact Christoph Groffmann, phone: +49 [...]
Saxwerk has delivered complete system with drawings for silo bottom, sliding frame and the discharge screw. Read more If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
Saxwerk has signed an agreement with Härjeåns Energi, Sweden, about a system for humidifying fly The system fills up a container system. If you have questions about this article, please contact Magnus Landberg, phone: +46 8-500 666 93.
Saxwerk will be deliver the complete engineering of 4 Pushfloor Systems for wood chips. The delivery is scheduled for September 2017. If you have questions about this article, please contact Christoph Groffmann, phone: +49 1715292122.
The delivery contains 4 Slidingframes for discharging wood and combust chips in 8,0 m diameter Silos. Delivery, assembly and commissioning in the existing Silos will be done in September 2017. If you have questions about this article, please contact Christoph Groffmann, phone: +49 1715292122.
Saxwerk has signed the contract for the engineering and part delivery about 4 wood chips pushfloors with 600m³ volume each. The delivery is scheduled for September 2017. If you have questions about this article, please contact Christoph Groffmann, phone: +49 1715292122.
Saxwerk has delivered a wet ash conveyor. Delivery, assembly and commissioning was done in Jun 2017. If you have questions about this article, please contact Christoph Groffmann, phone: +49 1715292122.
Saxwerk has received an order from Dösebacka treatment plant to deliver a complete silo with discharge system including control cabinet and control box. Delivery, assembly and commissioning will take place in autumn 2017. The silon is equipped with Saxwerk original sliding frame. The material to store and discharge is dewatered sludge from treatment plant. [...]
Saxwerk has signed an agreement for delivery of a complete receiving silo and two unloading silos to Borås Energi & Miljö. Saxwerk has signed an agreement with Borås Energy & Miljö to supply a receiving silo with hydraulically operated hatch cover. Also two unloading silos with discharge system using sliding frame. Delivery, installation and commissioning [...]
The delivery is a turnkey contract with fuel handling, furnace, boiler and electrostatic precipitator. Delivery includes boiler house and outsourced pipe construction. The mechanical installation begins after the summer. Commissioning will take place in early 2018. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95. [...]
Saxwerk has received orders for the delivery of a complete silo discharge system type slide frame to Biokraft Skogn in Norway. Delivery, installation and commissioning will take place in spring 2017. The material storing and outputting is industrial sludge. If you have questions about this article, please contact Olof Eriksson, phone: +46 8-500 666 [...]
Saxwerk has received orders for the delivery of a complete silo discharge system with sliding frame to Grödaland, Norway. Delivery, installation and commissioning will take place in spring 2017. The material to store and dispense is dewatered sludge from a biomass gasification. If you have questions about this article, please contact Magnus Spjuth Adelörn, [...]
Saxwerk has received an order to deliver a complete silo discharge system including the control cabinet and control box to Häggesta treatment plants. Delivery, installation and commissioning will take place in June 2017. The silo is equipped with Saxwerk original sliding frame discharge. The material, to store and dispense from the treatment plant, is dewatered [...]
Now Saxwerk has delivered four discharge systems for ash to Götaverken Miljö facilities in England. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
In the middle of August the mechanical assembly started as scheduled. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
Saxwerk has received an order to replace and upgrade the Heby sawmill infeed system. The entire furnace (15 MW) input system will be replaced. The rust width is 5016 mm. If you have questions about this article, please contact Magnus Spjuth Adelörn, phone: +46 8-500 666 99.
Saxwerk has received order to rebuild Sävsjö Energi fuel line in their boiler Hantverkaren. The delivery includes a scraper conveyor with a feed capacity of 15 m3/h. If you have questions about this article, please contact Magnus Landberg, phone: +46 8-500 666 93.
If you have questions about this article, please contact Olof Eriksson, phone: +46 8-500 666 91.
The delivery is a turnkey contract with fuel handling, furnace, boiler and electrostatic precipitator. Saxwerks commitment also includes a complete boiler house, piping and electrical installation. The mechanical assembly is expected to begin in the fall of 2016. Commissioning takes place in the end of the year. If you have questions about this article, [...]
Saxwerk has signed an order for delivery of 1 complete sludge silo with discharge system for Eskilstuna water treatment plant in Sweden. The delivery, assembling and start up will take place in Juni 2015. The silo is equipped with Saxwerk’s new ”splash protection device” moving bellow system. The sludge is from a water treatment plant. [...]
Saxwerk has signed an order for delivery of 1 complete sludge silo with discharge system for Bekkelaget in Norway. The delivery, assembling and start up will take place in December 2015. The sludge is from a water treatment plant. If you have questions about this article, please contact Magnus Spjuth Adelörn, phone: +46 8-500 [...]
Saxwerk will in 2016 deliver 4 ash discharge to Götaverken Environment's facilities in Margam, Templebourough and Dunbar. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
Saxwerk has been entrusted to provide intermediate storage pocket for waste to Nybro Värmecentral's new cogeneration plant. If you have questions about this article, please contact Magnus Landberg, phone: +46 8-500 666 93.
Saxwerk has signed an agreement with Roslagsvatten AB for delivery of a complete sludge silo with discharge and control systems. The delivery will take place in March 2015. In addition to installation and commissioning of new equipment, Saxwerk shall also dismantle the old facility. If you have questions about this article, please contact Magnus [...]
Saxwerk will deliver external management to the new energy facility in Moss, Årvollskogen. The delivery consists of two dosing bins with Saxwerk original push floor system and subsequent specially designed chain conveyor. Material is saw dust and bark. The delivery also includes an emergency bin. Delivery: 2015 Shipment is done via Hotab AB. If [...]
Saxwerk has received an order from Dösebacka treatment plant to deliver a complete silo with discharge system including control cabinet and control box. Delivery, assembly and commissioning will take place in autumn 2017. The silon is equipped with Saxwerk original sliding frame. The material to store and discharge is dewatered sludge from treatment plant. [...]
Saxwerk receives an order for a ash silo discharge system. Client: Alstom Power Sweden AB's facility in Linköping. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
Saxwerk will replace existing bottom ash conveyor at Ljusdals Energy. The old 10MW hot water boiler will be replaced by a wet ash conveyor. Saxwerk will also deliver a new semi-dry bottom ash conveyor to their new boiler. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95. [...]
Saxwerk has signed an agreement on a system for humidifying filter ash from electrostatic precipitator. The system is redundant and serves two container system. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.
The Archives: Saxwerk has received an orders to deliver two new dosing bins with discharge system to Värmecentral in Sandefjord, Norway The delivery will take place in 2014. The material to store and discharge is bark and sawdust. Shipment is done via Hotab AB. If you have questions about this article, please contact Magnus [...]
Saxwerk has received orders for delivery of two complete receiver bins with dispensing systems for delivery to Bergen Biogas plant in Norway. Delivery, installation and commissioning will take place in 2014. The material to store and dispense dewatered sewage sludge. If you have questions about this article, please contact Magnus Spjuth Adelörn, phone: +46 [...]
Saxwerk has received orders for the supply of six silos complete with dispensing systems for delivery in Bergen Norway. Delivery, installation and commissioning will take place during 2014 and 2015. The silos are provided with Saxwerks new "splash protection device" moving bellows system. The material to store and dispense dewatered sewage sludge. If you [...]
Saxwerk has signed an order for delivery of the receiving bin, spill-resistant conveyor and magnetic separator for waste handling, to Västervik Energy & Environment. If you have questions about this article, please contact Magnus Landberg, phone: +46 8-500 666 93.
Saxwerk has received an order for the entire material handling and a 19 MW power plant for a pellet plant in Gulbene, Latvia. Capacity 150,000 annual tons. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95
Alstom Power Sweden AB has added a new order of a waste silo into their projects. Layout unloading silo Ø3500. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95
Saxwerk has received an order to deliver a complete dry sawdust silo with discharge system. The silo has a volume of 500 m3. The order also consist explosion reliefs, level switches and platform. Output is done with a sliding frame and two conveyor discharge screws. Output goes to a mill and a transport system (output [...]
Saxwerk has received orders for the supply of 2+2 complete silos with discharge systems, for delivery in Norway. The delivery will take place in 2013 and 2014. The delivery includes complete manufacturing, installation and commissioning. The material to store and dispense are: dewatered sewage sludge. If you have questions about this article, please contact [...]
The delivery consists of two push floor bins 2x125 m3, which feeds a single chain conveyor. The capacity is 120 m3/h Through a disc screen for over size, a chain conveyor is fed which deliver the fuel to a distribution system consisting of three reversible screws. The screws feed either existing layer or two boiler [...]
Saxwerk has received an order from Rindi Syd AB in Tomelilla, to deliver their new fuel-receiving bin. The volume in the bin is on a total of 385 m3, with an output capacity of 20 m3/h. The discharge system, type push floor, is designed to handle bark, wood chips, sawdust and willow. If you [...]
Saxwerk has received order to deliver a new discharge system and silo bottom to an existing silo. The silo has today problems with output and bridge formations. Deliveries will be scheduled for 2012. The delivery includes complete manufacturing and assembly. The material to store and dispense are: shavings from planing. If you have questions [...]
Saxwerk has signed an additional contract with SWEDSPAN in Hultsfred, for delivery of conveyors after their four knife mills. Saxwerk will deliver a 1600 mm wide scraper conveyor below the mills. After the scraper is a 20 m high band conveyor positioned to lift the material up to an existing conveyor. The machines are designed [...]
Saxwerk have recieved an order from Alstom for the delivery of a discharge system of residual ash for Brista 2. The silo is a total of 350 m3 and handle waste products from the purification of flue gases from the new power heat plant. If you have questions about this article, please contact Tomas [...]
Saxwerk have now completed the installation of a 100 m3 sludge silo Sandvikens sewage treatment plant. If you have questions about this article, please contact Magnus Spjuth Adelörn, phone: +46 8-500 666 99.
